#!HEAD: dcsm-CRCO_PWI_CHECK 2021-05-06 02:14:49 678        45 MMO                  DCSM                // BAT Maintenance-1-2          
8001    # MMMMMMMMMMMMMMMMMMMMMMMMOMMMMMMMMMMMMMMMMMMMMMMMMMMMOMMMMMMMMMMMMMMMMMMMMM
8002    #  
8003    # 5.PWI
8004    #  
8005    # MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMOMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMOMMMMM
8006    # ==========================================================================
8007    #  5.1. Turn on the PWI except the MEFISTO
8008    # ==========================================================================
8009    #
8010    #
8011    DH.PWI1_ON # DH.MC_EACH_EXE 0x0096
8012    # MD2F.PME_EWO_ON
8013    # MD2F.PME_SORBET_ON
8014    # MD2F.PME_AM2P_ON
8015    # EWO.WPTP_ON
8016    # EWO.SCP_ON
8017    # MD2F.DPU_SW_ERR_CLR
8018    # MD2U.BUF_CLCT 0x10 0x00
8019    # MD2U.EWO_HW_INIT
8020    # 
8021    #
8022    # ++++++++++++++++++++++++++++++++++++
8023    WAIT_SEC 120                   
8024    # ++++++++++++++++++++++++++++++++++++
8025    #
8026    # QL         Check-Item               Spec　                    判  定
8027    # ----------+------------------------+-------------------------+------
8028    # MD2F       MD2F.PME_EWO_STS         ON                         N/A
8029    # MD2F_OBS   MD2F.PME_SORBET_STS      ON                    
8030    # MD2F_OBS   MD2F.PME_AM2P_STS        ON                    
8031    # MD2F_OBS   MD2F.MS1_LINK_STAT       ON                    
8032    # MD2F_OBS   MD2F.MS1_LINK_ERR        na                    
8033    # MD2F_OBS   MD2F.MS1_DAT_CLCT        ON                    
8034    # MD2F_OBS   MD2F.MS3_LINK_STAT       ON                    
8035    # MD2F_OBS   MD2F.MS3_LINK_ERR        na                    
8036    # EWO        EWO.WPTP_ONOF            ON                    
8037    # EWO        EWO.SCP_ONOF             ON                    
8038    #
8039    # EWO        WPT PREAMP CAL/IMP         R10M                     N/A
8040    # EWO        BIAS SWEEP COUNT           0x1                      N/A
8041    #
8042    MD2U.BUF_CLCT 0x10 0x01
8043    #
8044    # ++++++++++++++++++++++++++++++++++++
8045    WAIT_SEC 40                   
8046    # ++++++++++++++++++++++++++++++++++++
8047    #
8048    #
8049    # QL         Check-Item                 Spec　                  判  定
8050    # ----------+--------------------------+-----------------------+------
8051    # EWO        DATA COMPRESSION LM        ZERO                      N/A
8052    #
8053    #
8054    # <EFD Filter mode  (SOR:5sec-int,  EFD-L:4sec-int, Ave)>
8055    MD2U.EFD_FILTER_MODE 0x10
8056    #
8057    #
8058    # ++++++++++++++++++++++++++++++++++++
8059    WAIT_SEC 40                   
8060    # ++++++++++++++++++++++++++++++++++++
8061    # QL         Check-Item               Spec                     
8062    # ----------+------------------------+-------------------------
8063    # EWO        EWO.WPTP_ONOF            ON
8064    # EWO        EWO.WPTP_GAIN            LOW
8065    # EWO        EWO.WPTP_BIAS_ONOF       ON
8066    # EWO        EWO.WPTP_BIAS_CAL        BIAS
8067    # EWO        EWO.WPTP_CAL_ONOF        OFF
8068    # EWO        EWO.WPTP_CAL_IMP         R10M
8069    # EWO        EWO.SCP_ONOF             ON
8070    # EWO        EWO.SCP_CAL_STS          OFF
8071    # EWO        EWO.EFD_SYNC_STS         EWO
8072    # EWO        EWO.EFD_OBS_MODE         STBY
8073    # EWO        EWO.EFD_FB_ONOF          OFF
8074    # EWO        EWO.WPT1_BIAS            0x80
8075    # EWO        EWO.WPT2_BIAS            0x80
8076    # EWO        EWO.WPT1_LOOP_GAIN       0x00
8077    # EWO        EWO.WPT2_LOOP_GAIN       0x00
8078    # EWO        EWO.EFD_BIAS_SWP_1       0x00
8079    # EWO        EWO.EFD_BIAS_X1_CNT      0x01
8080    # EWO        EWO.WFC_E_AM2P_SEL       STBY
8081    # EWO        EWO.WFC_E_INP_SEL        DIFF
8082    # EWO        EWO.WFC_E_LPF_STS        FC_20KHZ
8083    # EWO        EWO.WFC_E_PGA_STS        LOW
8084    # EWO        EWO.WFC_B_OBS_STS        STBY
8085    # EWO        EWO.WFC_B_LPF_STS        FC_20KHZ
8086    # EWO        EWO.WFC_B_PGA_STS        LOW
8087    # EWO        EWO.WFC_E_CAL_ATT        OFF
8088    # EWO        EWO.WFC_E_EFD_ICAL       OFF
8089    # EWO        EWO.WFC_B_ICAL           OFF
8090    # EWO        EWO.TEMP_MON_ONOF        ON
8091    # EWO        EWO.AM2P_TC_CNT          0x00
8092    # EWO        EWO.AM2P_TMTRG_CNT       0x00
8093    #
8094    # < Record of the initial vcalues >
8095    #
8096    # QL         Check-Item                 Data                    
8097    # ----------+--------------------------+-----------------------------
8098    # EWO        TI                         _________
8099    # EWO        AM2P ACK COUNT             _________
8100    # EWO        AM2P ACQUI COUNT           _________
8101    # EWO        WFC(E) RANGE OVER          _________
8102    # EWO        WFC(B) RANGE OVER          _________
8103    # EWO        MDP TELEMETRY              _________
8104    # EWO        EWO SRAM OVERFLOW EFD      _________
8105    # EWO        EWO SRAM OVERFLOW WFC(E)   _________
8106    # EWO        EWO SRAM OVERFLOW WFC(B)   _________
8107    # EWO        LATCH UP EFD               _________
8108    # EWO        LATCH UP WFC(E)            _________
8109    # EWO        LATCH UP WFC(B)            _________
8110    # EWO        MDP RING BUF1              _________
8111    # EWO        MDP RING BUF2              _________
8112    # EWO        MDP RING BUF3              _________
8113    # EWO        MDP RING BUF4              _________
8114    # EWO        ERRORS CMD COUNT           _________
8115    # EWO        ERRORS RMAP CRC            _________
8116    # EWO        ERRORS SRAM WFC(E) 1BIT    _________
8117    # EWO        ERRORS SRAM WFC(E) 2BIT    _________
8118    # EWO        ERRORS SRAM WFC(B) 1BIT    _________
8119    # EWO        ERRORS SRAM WFC(B) 2BIT    _________
8120    # EWO   ERRORS FIR COEF TABLE EFD       _________
8121    # EWO   ERRORS FIR COEF TABLE WFC(B)    _________
8122    #
8123    # < Initial HK check of  SORBET >
8124    #
8125    # 
8126    # QL         Check-Item               Spec                      Check
8127    # ----------+------------------------+-------------------------+------
8128    # 
8129    # QL      Check-item                       Spec                   NA
8130    # ----------------------------------------+--------------------
8131    #  SRBT    COMMAND CODE                    0x0000              
8132    #          WPT GAIN                        LOW                 
8133    #          WPT BIAS                        OFF                 
8134    #          WPT CAL                         OFF                 
8135    #          TNR1 OPERATION                  OFF                 
8136    #          TNR1 INP SETUP                  0x0                 
8137    #          TNR2 OPERATION                  OFF                 
8138    #          TNR2 INP SETUP                  0x0                 
8139    #          HFR OPERATION                   OFF                 
8140    #          HFR INP SETUP                   0x0                 
8141    #          HFR VIA TNR1                    0x0                 
8142    #          HFR VIA TNR2                    0x0                 
8143    #          HF1 RANGE                       0x0                 
8144    #          HF2 RANGE                       0x0                 
8145    #          HFR FREQ. STEP                  0x0                 
8146    #          SPACEWIRWE LINK RUNNING         0x1                 
8147    #          SPACEWIRE DISCON. ERROR         NORMAL              
8148    #          CALIBRATION SOURCE SETUP        0x0                 
8149    #          CALIBRATION BAND A              0x0                 
8150    #          CALIBRATION BAND B              0x0                 
8151    #          CALIBRATION BAND C              0x0                 
8152    #          CALIBRATION BAND D              0x0                 
8153    #          CALIBRATION BAND HF1            0x0                 
8154    #          CALIBRATION BAND HF2            0x0                 
8155    #
8156    # QL      Check-item                       Spec     Result      Check(NA)
8157    # ----------------------------------------+--------+-----------+------
8158    #          MEFISTO GAIN                             ________    -----
8159    #          MEFISTO BIAS                             ________    -----
8160    #          MEFISTO CAL                              ________    -----
8161    #          AM2P OPERATION                           ________    -----
8162    #
8163    # ============================================
8164    # 5.2 Setting of the nominal observation mode 
8165    # ============================================
8166    #
8167    DH.MC_EACH_EXE 0x00D3
8168    # EWO.WFCE_OBS_START
8169    # EWO.WFCB_OBS_START
8170    # EWO.EFD_OBS_START
8171    # SORB.OBS_SEQ
8172    # MD2U.BUF_CLCT 0x10 0x01
8173    #
8174    #
8175    # ++++++++++++++++++++++++++++++++++++
8176    WAIT_SEC 60                   
8177    # ++++++++++++++++++++++++++++++++++++
8178    #
8179    # QL        Check-item              Spec                        Check(NA)
8180    #----------+-----------------------+---------------------------+------
8181    # EWO       EFD OBS MODE            OBS                         
8182    # EWO       WFC(E) OBS MODE         WFC_OBS                     
8183    # EWO       WFC(B) OBS MODE         OBS                         
8184    # MD2F      MS3_DAT_CLCT            ON                          
8185    # EWO       MDP TELEMETRY           ENA                         
8186    #
8187    MD2U.EWO_WFCE_FREQ_SEL 0x01
8188    #
8189    # ++++++++++++++++++++++++++++++++++++
8190    WAIT_SEC 40                   
8191    # ++++++++++++++++++++++++++++++++++++
8192    #
8193    # QL      Check-item            Spec                            Check(NA)
8194    #----------+-------------------+-------------------------------+------
8195    # EWO       WFC(E) LPF FREQ     FC_120KHZ                       
8196    #
8197    #
8198    # <EFD Mode (M:full-component  L:full-component)>
8199    MD2U.EWO_EFD_MODE 0xFF 0xFF
8200    WAIT_SEC 40                   
8201    # ++++++++++++++++++++++++++++++++++++
8202    WAIT_SEC 40                   
8203    # ++++++++++++++++++++++++++++++++++++
8204    #
8205    #
8206    # ============================================
8207    # 5.3 Turn on the MEFISTO
8208    # ============================================
8209    #
8210    DH.PWI2_ON # DH.MC_EACH_EXE 0x008A
8211    # MD2F.PME_MEFISTO_ON
8212    # MD2F.DPU_SW_ERR_CLR
8213    #
8214    #
8215    # ++++++++++++++++++++++++++++++++++++
8216    WAIT_SEC 40                   
8217    # ++++++++++++++++++++++++++++++++++++
8218    #
8219    # QL         Check-Item               Spec                      Check
8220    # ----------+------------------------+-------------------------+------
8221    # MD2F_OBS   MD2F.PME_MEFISTO_STS     ON                         G  N
8222    # MD2F_OBS   MD2F.MS4_LINK_STAT       ON                         G  N
8223    # MD2F_OBS   MD2F.MS4_LINK_ERR        na                         G  N
8224    #
8225    # Automatic shutdown when MDP finds |HV|>110V
8226    MD2U.MEF_HV_CNTL_ENA 0x28 0xFF 0x00 0x90
8227    #
8228    #
8229    # ++++++++++++++++++++++++++++++++++++
8230    WAIT_SEC 40                   
8231    # ++++++++++++++++++++++++++++++++++++
8232    #
8233    # QL          Check-Item               Spec                      RESULT
8234    # -----------+------------------------+-------------------------+------
8235    # MEFISTO     U_HV_CNTL_CHK            ENA                        N/A
8236    # MEFISTO     U_HV_CNTL_DET            NON                        N/A
8237    # MEFISTO     U_HV_CNTL_PARA_NL        0x28(-110V)                N/A
8238    # MEFISTO     U_HV_CNTL_PARA_NU        0xFF                       N/A
8239    # MEFISTO     U_HV_CNTL_PARA_PL        0x00                       N/A
8240    # MEFISTO     U_HV_CNTL_PARA_PU        0x90(+110V)                N/A
8241    #
8242    # =====================================================
8243    # 5.4 Initialization of the MEFISTO (Turning on the HV)
8244    # =====================================================
8245    DH.MC_EACH_EXE 0x00D2
8246    # MEFI.INIT_A
8247    # DH.DUMMY
8248    # MEFI.INIT_A
8249    # DH.DUMMY
8250    # MEFI.INIT_B
8251    # DH.DUMMY
8252    # MEFI.INIT_C
8253    #
8254    #
8255    # ++++++++++++++++++++++++++++++++++++
8256    WAIT_SEC 120                   
8257    # ++++++++++++++++++++++++++++++++++++
8258    #
8259    # QL          Check-Item               Spec                      Check
8260    # -----------+------------------------+----------------------+---------
8261    # MEFISTO     BDAC1                    0x8000                   
8262    # MEFISTO     BDAC2                    0x8000                   
8263    # MEFISTO     SDAC1                    0x8000                   
8264    # MEFISTO     SDAC2                    0x8000                   
8265    # MEFISTO     ADC_HV_NEG               < |145|                  
8266    # MEFISTO     ADC_HV_POS               < |145|                  
8267    # -----------+------------------------+----------------------+---------
8268    #
8269    # ==========================================================================
8270    #  5.5 PWI Function check (ALL ON)
8271    # ==========================================================================
8272    #  5.5.1 Sensor CAL
8273    # ==========================================================================
8274    #
8275    MD2U.EWO_WFCE_GAIN_SET 0x01
8276    #
8277    #
8278    # ++++++++++++++++++++++++++++++++++++
8279    WAIT_SEC 40                   
8280    # ++++++++++++++++++++++++++++++++++++
8281    #
8282    # QL      Check-item                              spec       Check
8283    # --------------------------------------------------------------------
8284    # EWO     WFC(E) GAIN                              LOW          N/A
8285    #
8286    EWO.WFCB_PGA_L_SEL
8287    #
8288    #
8289    # ++++++++++++++++++++++++++++++++++++
8290    WAIT_SEC 40                   
8291    # ++++++++++++++++++++++++++++++++++++
8292    #
8293    # QL      Check-item                               spec       Check
8294    # --------------------------------------------------------------------
8295    # EWO     WFC(B) GAIN                              LOW         N/A
8296    #
8297    EWO.CAL_ATT_20_SEL
8298    #
8299    #
8300    # ++++++++++++++++++++++++++++++++++++
8301    WAIT_SEC 40                   
8302    # ++++++++++++++++++++++++++++++++++++
8303    #
8304    # QL      Check-item                              spec       Check
8305    # --------------------------------------------------------------------
8306    # EWO     CALIBRATION EWO(E) ATT                  LVL_20DB      N/A
8307    #
8308    EWO.WPTP_AC_CAL_SEL
8309    #
8310    #
8311    # ++++++++++++++++++++++++++++++++++++
8312    WAIT_SEC 40                   
8313    # ++++++++++++++++++++++++++++++++++++
8314    #
8315    # QL      Check-item                              spec       Check
8316    # --------------------------------------------------------------------
8317    # EWO     WPT PREAMP CAL/IMP                        R1K         N/A
8318    #
8319    #
8320    # ++++++++++++++++++++++++++++++++++++
8321    WAIT_SEC 40                   
8322    # ++++++++++++++++++++++++++++++++++++
8323    #
8324    MD2U.EWO_WFCE_INP_SEL 0x02
8325    WAIT_SEC 2                   
8326    #
8327    # QL      Check-item                               spec         判定
8328    # --------------------------------------------------------------------
8329    # EWO     WFC(E) INP MODE                          WPT_MONO      N/A
8330    #
8331    EWO.WPTP_LGAIN_SEL
8332    WAIT_SEC 2                   
8333    #
8334    # QL      Check-item                               spec       Check
8335    # --------------------------------------------------------------------
8336    # EWO     WPT PREAMP GAIN                          LOW          N/A
8337    #
8338    #
8339    EWO.SCAL_ALL_ON
8340    #
8341    #
8342    # ++++++++++++++++++++++++++++++++++++
8343    WAIT_SEC 40                   
8344    # ++++++++++++++++++++++++++++++++++++
8345    #
8346    # QL      Check-item                              spec       Check
8347    # --------------------------------------------------------------------
8348    # EWO     WPT PREAMP CAL SW                        ON           N/A
8349    # EWO     SEARCH COIL PREAMP CAL SW                ON           N/A
8350    #
8351    #
8352    MD2U.EWO_AM2P_SUSPND 0x01
8353    #
8354    #
8355    # ++++++++++++++++++++++++++++++++++++
8356    WAIT_SEC 40                   
8357    # ++++++++++++++++++++++++++++++++++++
8358    #
8359    # QL      Check-item                              spec       Check
8360    # --------------------------------------------------------------------
8361    # EWO     AM2P STAGE                               SPD         N/A
8362    #
8363    #
8364    MD2U.EWO_WFC_CAL_ON 0x0074 0x07
8365    #
8366    WAIT_SEC 120                   
8367    #
8368    # QL      Check-item                              spec       Check
8369    # --------------------------------------------------------------------
8370    # EWO     CALIBRATION STAGE                     increment       N/A
8371    # EWO     AM2P TC WORD COUNT                     increment       N/A
8372    # EWO     AM2P ACK COUNT                        increment       N/A
8373    # EWO     AM2P TM TRG COUNT                     increment       N/A
8374    # EWO     AM2P ACQUI COUNT                      increment       N/A
8375    # EWO     TC  WORD                               0x0074       N/A
8376    #
8377    #
8378    #
8379    MD2U.EWO_AM2P_SUSPND 0x00
8380    #
8381    # ++++++++++++++++++++++++++++++++++++
8382    WAIT_SEC 40                   
8383    # ++++++++++++++++++++++++++++++++++++
8384    #
8385    # QL      Check-item                              spec       Check
8386    # --------------------------------------------------------------------
8387    # EWO     AM2P STAGE                               RUN         N/A
8388    #
8389    #
8390    #
8391    MD2U.EWO_AM2P_INT_SET 0x0000 0x00
8392    #
8393    #
8394    # ++++++++++++++++++++++++++++++++++++
8395    WAIT_SEC 40                   
8396    # ++++++++++++++++++++++++++++++++++++
8397    #
8398    #
8399    EWO.SCAL_ALL_OFF
8400    #
8401    # ++++++++++++++++++++++++++++++++++++
8402    WAIT_SEC 40                   
8403    # ++++++++++++++++++++++++++++++++++++
8404    #
8405    # QL      Check-item                              spec       Check
8406    # --------------------------------------------------------------------
8407    # EWO     WPT PREAMP CAL SW                        OFF           N/A
8408    # EWO     SEARCH COIL PREAMP CAL SW                OFF           N/A
8409    #
8410    EWO.CAL_ATT_OPEN
8411    #
8412    #
8413    # ++++++++++++++++++++++++++++++++++++
8414    WAIT_SEC 40                   
8415    # ++++++++++++++++++++++++++++++++++++
8416    #
8417    # QL      Check-item                              spec       Check
8418    # --------------------------------------------------------------------
8419    # EWO     CALIBRATION EWO(E) ATT                   OFF         N/A
8420    #
8421    #
8422    MD2U.EWO_WFCE_INP_SEL 0x04
8423    #
8424    #
8425    # ++++++++++++++++++++++++++++++++++++
8426    WAIT_SEC 40                   
8427    # ++++++++++++++++++++++++++++++++++++
8428    #
8429    # QL      Check-item                               spec         判定
8430    # --------------------------------------------------------------------
8431    # EWO     WFC(E) INP MODE                              DIFF      N/A
8432    # 
8433    #
8434    # ==========================================================================
8435    #  5.5.2 EFD Bias Sweep
8436    # ==========================================================================
8437    # <setup & CAL-flag set>
8438    EWO.EFD_BIAS_OFF
8439    WAIT_SEC 8                   
8440    #
8441    EWO.EFD_BS_PH_SET 0x0200
8442    WAIT_SEC 8                   
8443    #
8444    MD2U.EWO_EFD_SWPTBL_LOAD 0x10
8445    WAIT_SEC 8                   
8446    #
8447    #
8448    # <SWEEP with WPT-P = BIAS>
8449    EWO.WPTP_BIAS_SEL
8450    WAIT_SEC 8                   
8451    #
8452    EWO.EFD_BIAS1_SWEEP
8453    WAIT_SEC 40                   
8454    #
8455    EWO.EFD_BIAS2_SWEEP
8456    WAIT_SEC 40                   
8457    # 
8458    EWO.EFD_BIAS1_SWEEP
8459    WAIT_SEC 40                   
8460    #
8461    EWO.EFD_BIAS2_SWEEP
8462    WAIT_SEC 40                   
8463    #
8464    #
8465    # <SWEEP with WPT-P = CAL>
8466    EWO.WPTP_DC_CAL_SEL
8467    WAIT_SEC 8                   
8468    #
8469    EWO.EFD_BIAS1_SWEEP
8470    WAIT_SEC 40                   
8471    #
8472    EWO.EFD_BIAS2_SWEEP
8473    WAIT_SEC 40                   
8474    #
8475    EWO.EFD_BIAS1_SWEEP
8476    WAIT_SEC 40                   
8477    #
8478    EWO.EFD_BIAS2_SWEEP
8479    WAIT_SEC 40                   
8480    #
8481    #
8482    # <close & CAL-flag down>
8483    MD2U.EWO_EFD_SWPTBL_LOAD 0xFF
8484    WAIT_SEC 8                   
8485    #
8486    EWO.WPTP_BIAS_SEL
8487    WAIT_SEC 8                   
8488    #
8489    EWO.EFD_BIAS_OFF
8490    WAIT_SEC 8                   
8491    #
8492    #
8493    # ==========================================================================
8494    #  5.5.3 AM2P Wire mode
8495    # ==========================================================================
8496    #
8497    #
8498    DH.PWI_AM2P_DOUB_WR_MODE_HF # DH.MC_EACH_EXE 0x00DB
8499    #:   << MACRO >> Contents are below
8500    #:   0x00 MD2U.EWO_AM2P_FREQ_PRST 0x01
8501    #:   0x01 MD2U.EWO_AM2P_INP_PRST 0x01
8502    #:   0x02 MD2U.EWO_AM2P_MEF_MODE_PRST 0x212a
8503    #:   0x03 MD2U.EWO_AM2P_MEF_BIAS1_SET 0x800080
8504    #:   0x04 MD2U.EWO_AM2P_MEF_BIAS2_SET 0x800080
8505    #:   0x05 MD2U.EWO_AM2P_TC_SET 0x7004 0x07
8506    #
8507    #
8508    # ++++++++++++++++++++++++++++++++++++
8509    WAIT_SEC 60                   
8510    # ++++++++++++++++++++++++++++++++++++
8511    #
8512    MD2U.EWO_AM2P_WPTP_GAIN_PRST 0x00
8513    #
8514    # ++++++++++++++++++++++++++++++++++++
8515    WAIT_SEC 40                   
8516    # ++++++++++++++++++++++++++++++++++++
8517    #
8518    MD2U.EWO_AM2P_EWOE_GAIN_PRST 0x01
8519    #
8520    # ++++++++++++++++++++++++++++++++++++
8521    WAIT_SEC 40                   
8522    # ++++++++++++++++++++++++++++++++++++
8523    #
8524    MD2U.EWO_AM2P_INT_SET 0xFFFF 0x01
8525    #
8526    # ++++++++++++++++++++++++++++++++++++
8527    WAIT_SEC 120                   
8528    # ++++++++++++++++++++++++++++++++++++
8529    #
8530    MD2U.EWO_AM2P_INT_SET 0xFFFF 0x01
8531    #
8532    # ++++++++++++++++++++++++++++++++++++
8533    WAIT_SEC 120                   
8534    # ++++++++++++++++++++++++++++++++++++
8535    #
8536    #
8537    #
8538    # ==========================================================================
8539    #  5.5.4 SORBET Function test
8540    # ==========================================================================
8541    #
8542    SORB.CAL_SEQ 
8543    #
8544    # QL      Check-item                               spec      Check
8545    # --------------------------------------------------------------------
8546    #  SRBT    COMMAND CODE           0x6CEF/0x705F/0x970F/0x9730  N/A
8547    #          COMMAND COUNTER                          Increment  N/A
8548    #          TNR1 OPERATION                           ON/OFF     N/A
8549    #          TNR1 INP SETUP                   0x0/0x3/0x4/0x5    N/A
8550    #          TNR2 OPERATION                           ON         N/A
8551    #          TNR2 INP SETUP                   0x0/0x3/0x4/0x5    N/A
8552    #          HFR OPERATION                            ON         N/A
8553    #          HFR INP SETUP                            0x0/0x3    N/A
8554    #          HFR VIA TNR1                             0x0/0x1    N/A
8555    #          HFR VIA TNR2                             0x0/0x1    N/A
8556    #          HF1 RANGE                                0x0/0x1    N/A
8557    #          HF2 RANGE                                0x0/0x1    N/A
8558    #          HFR FREQ. STEP                           Increment  N/A
8559    #          CALIBRATION SOURCE SETUP           0x0/0x3/0x7/0x9  N/A
8560    #          CALIBRATION HF1                          0x0/0x1    N/A
8561    #          CALIBRATION HF2                          0x0/0x1    N/A
8562    #
8563    #
8564    # ++++++++++++++++++++++++++++++++++++
8565    WAIT_SEC 300                   
8566    # ++++++++++++++++++++++++++++++++++++
8567    #
8568    #
8569    #
8570    #  <Observation Sequence>
8571    SORB.OBS_SEQ
8572    #
8573    #
8574    # QL      Check-Item                               Spec      Check
8575    # --------------------------------------------------------------------
8576    #  SRBT    COMMAND CODE                      0X518F/0x53BF     N/A
8577    #          COMMAND COUNTER                          Increment  N/A
8578    #          TNR1 OPERATION                           ON         N/A
8579    #          TNR1 INP SETUP                           0x1        N/A
8580    #          TNR2 OPERATION                           ON         N/A
8581    #          TNR2 INP SETUP                   0X2/0x3/0x4        N/A
8582    #          HFR OPERATION                       ON<->OFF        N/A
8583    #          HFR INP SETUP                        0x0/0x1        N/A
8584    #          HFR VIA TNR1                             0x0        N/A
8585    #          HFR VIA TNR2                       0x0<->0x1        N/A
8586    #          HF1 RANGE                                0x0        N/A
8587    #          HF2 RANGE                          0x0<->0x1        N/A
8588    #          HFR FREQ. STEP                     Increment        N/A
8589    #
8590    #
8591    # ++++++++++++++++++++++++++++++++++++
8592    WAIT_SEC 40                   
8593    # ++++++++++++++++++++++++++++++++++++
8594    #
8595    #
8596    # ==========================================================================
8597    #  5.6 PWI shutdown
8598    # ==========================================================================
8599    #
8600    DH.PWI_OFF1_AM2P_MEF_PRE # DH.MC_EACH_EXE 0x008B
8601    #:   << MACRO >> Contents below
8602    #:   0x00 MD2U.EWO_AM2P_INT_SET 0x0000 0x00
8603    #:   0x0D MD2F.PME_MEFISTO_OFF
8604    #:   0x0E EWO.SCP_OFF
8605    #:   0x0F EWO.WPTP_OFF
8606    #
8607    #
8608    # ++++++++++++++++++++++++++++++++++++
8609    WAIT_SEC 60                   
8610    # ++++++++++++++++++++++++++++++++++++
8611    #
8612    # QL         Check-Item               Spec                      Check
8613    # ----------+------------------------+-------------------------+---------
8614    # MD2F_OBS   MD2F.MS4_LINK_STAT       OFF                         
8615    # MD2F_OBS   MD2F.PME_MEFISTO_STS     OFF                         
8616    # EWO        EWO.WPTP_ONOF            OFF                         
8617    # EWO        EWO.SCP_ONOF             OFF                         
8618    #
8619    DH.PWI_OFF2_AM2P_SOR_EWO # DH.MC_EACH_EXE 0x00AD
8620    #:   << MACRO >> 内容について以下に示す(DH.DUMMY は省略)
8621    #:   0x00 MD2F.PME_AM2P_OFF
8622    #:   0x01 MD2F.SORB_CLCT_STOP
8623    #:   0x02 MD2F.PME_SORBET_OFF
8624    #:   0x03 MD2U.BUF_CLCT 0x10 0x00
8625    #:   0x0F MD2F.PME_EWO_OFF
8626    #
8627    #
8628    # ++++++++++++++++++++++++++++++++++++
8629    WAIT_SEC 60                   
8630    # ++++++++++++++++++++++++++++++++++++
8631    #
8632    # QL         Check-Item               Spec　                    Check
8633    # ----------+------------------------+-------------------------+--------
8634    # MD2F_OBS   MD2F.MS1_CLCT_STAT       OFF                         
8635    # MD2F_OBS   MD2F.MS3_CLCT_STAT       OFF                         
8636    # MD2F_OBS   MD2F.MS1_LINK_STAT       OFF                         
8637    # MD2F_OBS   MD2F.MS2_LINK_STAT       OFF                         
8638    # MD2F_OBS   MD2F.MS3_LINK_STAT       OFF                         
8639    # MD2F_OBS   MD2F.PME_SORBET_STS      OFF                         
8640    # MD2F_OBS   MD2F.PME_AM2P_STS        OFF                         
8641    # MD2F_OBS   MD2F.PME_EWO_STS         OFF                         
8642    #
8643    #  DEL 2021.5.13
8644    ####PCD.ON_OFF_ENA
8645    #
8646    # ++++++++++++++++++++++++++++++++++++
8647    ###WAITSEC 60                   
8648    # ++++++++++++++++++++++++++++++++++++
8649    #
8650    # QL         Check-Item               Spec　                     check
8651    # ----------+------------------------+-------------------------+------
8652    # PCS1       <PCD> ON/OFF             ENA                        N/A
8653    #
8654    # 
8655    ######PCD.PSU_PME_OFF
8656    ######WAITSEC 2                   
8657    ######PCD.ON_OFF_DIS
8658    ######WAITSEC 2                   
8659    #
8660    # QL         Check-Item               Spec　                     check
8661    # ----------+------------------------+-------------------------+------
8662    # PCS1       <PCD> PME                OFF                         N/A
8663    # PCS1       <PCD> ON/OFF             DIS                        N/A
8664    #
8665    # ==========================================================================
8666    #  SET MD2U Normal mode【interactive】
8667    # ==========================================================================
8668    #
8669    MD2U.OPE_NRM
8670    WAIT_SEC 40                   
8671    #
8672    #
8673    # QL         Check-Item               Spec　                  Judgment
8674    # ----------+------------------------+-----------------------+--------
8675    # MD2U       *****CHECK by MDP-CORE****
8676    #           U_Tlm_OpeMode             nrm                      N/A
8677    #
8678    EXIT